D14P
 |
D14P
|
| Technical info :
Number of axis : 4 |
Standard hardware :
Work area light
|
Standard software :
Cam Software 4 axis with Yenamill
|
Hardware options :
TABLE 2,7 kW SPINDLE SUCTION SYSTEM CERAMIC HOLDER BLOCK HOLDER
DC40
|
DC40
THE MUST OF PRECISION FOR MACHINING CENTERS Particularly suitable for implant processing, it is the top of the range Yenadent! |
|
|
|
EXCEPTIONAL PIN OF HIGH QUALITY The DC40 has a 6.5 kW IMT® 80 pin, |
 |
RIGIDITY As for an industrial machine, the cast iron structure and the granite base give exceptional rigidity, which guarantees an impeccable surface finish. |
|
|
BALL SCREW AND PRISMATIC SLIDE
THK grade C5 ball screws (without backlash) are a guarantee of high quality.
|
 |
TOOL HOLDER HSK 25 Thanks to the 10 Big Daishowa® tool holders included, you benefit from precision, power and flexibility. |
 |
OPTICAL RULE |
 |
SYSTÈME 3R
|
|
Description de la machine : |
||
| Number of axes | 5 | Équipement : |
| Number of disks | 1 | Règle optique Heidenhain® |
| CAM software | Oui | Eclairage de la zone de travail |
| Courses d'axes XYZ (mm) | 400 x 230 x 140 | Vis à billes & glissière prismatique |
| Angle d'inclinaison des axes | 30° | PC avec écran tactile |
| Commande | High Speed YC | 10 pinces Big Daishowa® |
| Moteurs d'axes | AC Servomoteurs | Réducteur haute précision |
| Puissance de broche | 6,5 kW | Structure en fonte et table granite |
| Vitesse de broche | 45000 tr/min | Système sous eau avec 2 pompes + support 3 céramiques |
| Changeur outils | Oui en standard | Support mono premill |
| Nombre d'outils dans le changeur | 12 | |
| Capteur outils | Oui en standard | Software FAO : |
| Poids | 680 Kg | Mayka dentaire 5 axes + Implants Multi et pré-usinées |
| Dimensions (cm) | 100cm x 79cm x 174cm | Outils de substitution |
| Ouverture de porte | Pneumatique | Surveillance d'outils |
| Message de suivi de production |
Option : Vacuum :
The base of Yena Machines
 |
 |
 |
|
MONOBLOC DESIGN
|
POWERFUL ELECTROBROCHE
|
|
 |
 |
|
|
SUPPORTS INOX TOOLS
|
HIGH PRECISION REDUCER
|
|
 |
 |
|
|
HIGH QUALITY COATING
|
AC SERVO MOTEURS All machine axes are driven by servo motors. Their ultra-precise encoders deliver a resolution of 0.5 microns on each axis. |
|
 |
 |
|
|
VERY SPECIFIC WIRING |
SUBSTITUTION TOOL AND AUTOMATIC MEASUREMENT
|
D10
D10 : FOR ALL SOFT MATERIALS AND CERAMICS
You can mill all soft materials and ceramics on D10 machine : Zirconia - PMMA - WAX - PEEK - Ceramics
|
Technical informations STANDARD HARDWARE
Work area light
12 times tool changer Tool lenght switch Micro Stepper motors Precision guides and ball screws PC with 17" touch screen Precision gear boxes |
STANDARD SOFTWARE
Sister tool
Auto tool lenght check Email messages Batch Jobs HARDWARE OPTIONS
Suction system
Table Wet System SOFTWARE
Advance CAM Software
|
D43
Featuring a complete equipment and wet milling system
The D43 standard full equipment features disk holder, high frequency spindle and tool changer.
This machine is designed for metal milling and is equiped with wet milling system (tank, pump, filter)
Technical information
| Number of disks | 1 |
| XYZ Stroke (mm) | 400 x 230 x 130 |
| Axes Engine | servo-motor 400W |
| Spindle Power | 2,7 kW |
| Spindle Speed | 60000 rpm |
| Tool Changer | Yes |
| Number of tools | 24 |
| Tool Sensor | Yes |
| Weight | 210 kg |
| Dimensions (cm) | 164x 80 x 80 |
- THK slides and ball screw (Japan)This D43 machine also features the following components:
- Harmonic Drive Rotary axis (Certified German system)
- Compressed air nozzle facing the milling tool
- LED lighting of the milling area
- USB key for system recovery
Options :
- Suction,
- Premilled holder
- Machine color
- YENADENT implant library and premilled
This machine was fisrst introduced in the Fall '15 during the Lyon ARIA meeting. The New D43 is a versatile complete sturdy machine. The new D43 machine can mill any materials (Wax, PMMA, PU resin, Zirconia, Chrome-Cobalt and Titanium). It can either be used with wet or dry milling system (along with compressed air). It features an inlet for resins and Zirconia milling (specific vaccum available). The table is embedded with the wet milling system: tank, pump and filter for Titanium, Chrome-Cobalt and hard ceramics milling.
D14 & D15
THE DRY MACHINING SOLUTION OF ZIRCONIA AND METAL
The D15 mills all materials that require dry milling.
Continuous 5-axis machining and the fact that the A & B axes can be inclined gives you
the ability to automatically process areas undercut.
Technical information
Number of axis : 5
Movements : 200 x 100 x 70 mm
A & B axes tilt angle : 24 degrees
Control : High Speed YC
Axis motors : AC Servo
Spindle power : 1.3 kW Spindle
Spindle RPM : 60.000 rpm
Number of blocks : 1 pc
Tool Change : 20 pockets
Tool length switch : Standard
Weight : 140 kg
The range of machines
Yena Europe features a complete range of machines. Whatever your machining needs, we have the machine to answer them :
 |
 |
 |
 |
 |
|
|
D10
|
|
|
|
|
|
|
|
Yenadent produces milling machines for the Dental industry. It was created in 1996 and started producing 20 years ago.
|
 D15 - 5 axis : 1 disc |
Our machines are open systems capable of machining the STL files generated by your scanner and its CAD (Dental Wings, Exocad, 3 Shape). They are made to meet all your milling needs.
|
D6
|
|
D6 BETTER THAN BLOCK CHANGER
You can use colored blocks or different thickness metal blocks in one setup TITAN CrCO WAX PMMA PEEK CERA ZR
|
|
Technical info Number of axis : 5 Movements : 400 x 200 x 100 mm Control : High Speed YC Axis motors : AC Servo Spindle power : 2.7 kW Spindle Spindle RPM : 60.000 rpm Number of blocks : 6 pc Tool Change : 32 pockets Tool lenght switch : Standard Weight : 450 kg Dimensions : 105 x 70 x 171 cm
|
 |
|
|
|
 |
Standard hardware |
|
|
|
|
Standard software
|
 |
|
|